Mostrar el registro sencillo del ítem

dc.contributor.authorPASCHOALINOTO, N. W.
dc.contributor.authorEd Claudio Bordinassi
dc.contributor.authorRoberto Bortolussi
dc.contributor.authorFabrizio Leonardi
dc.contributor.authorSergio Delijaicov
dc.date.accessioned2022-01-03T19:29:05Z
dc.date.available2022-01-03T19:29:05Z
dc.date.issued2020-04-26
dc.identifier.citationPASCHOALINOTO, N. W. BORDINASSI, E. C. ; BORTOLUSSI, R; LEONARDI, F. ; DELIJAICOV, S. The effect of process parameters and cutting tool shape on residual stress of SAE 52100 hard turned steel by high speed machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, v. 1, p. 095440542092978, 2020.
dc.identifier.issn2041-2975
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/3498
dc.description.abstractThis study focused on determining the residual stress of SAE 52100 hard-turned steel. The objective was to evaluate and compare the effects of the cutting-edge geometry and cutting parameters (cutting speed, feed rate, and cutting depth) on the residual stresses of three different conventional inserts: S-WNGA08 0408S01020A 7025, T-WNGA08 0408T01020A 7025, and S-WNGA432S0330A 7025. Tests were performed on 60 samples of SAE 52100 hardened steel with an average hardness of 58.5 HRC. The circumferential residual stresses of the samples were measured by X-ray diffraction. A full factorial design of experiments with three factors and two levels each with two central points and a replicate was used for a statistical analysis. The most significant results were as follows: For all inserts, the measured residual stresses were compressive, which extended the tool lifespan. The residual stresses of the Type-S inserts were significantly influenced by the cutting speed and depth, and those of the Type-T insert were significantly influenced by the feed rate and cutting depth. In addition, the residual stresses of the insert 3 were more compressive than those of the other two types of inserts. In other words, residual stresses are more compressive for inserts with larger chamfer angles even as the principal residual stress profiles were all compressive. This work has also shown that it is possible to determine a significant statistical relationship between cutting forces and residual stresses, allowing force measurements to predict the residual stress without any information on process parameters.
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
dc.rightsAcesso Restrito
dc.subjectHard turning
dc.subjectMachining
dc.subjectResidual stress
dc.subjectFactorial design
dc.subjectSAE 52100 steel
dc.titleThe effect of process parameters and cutting tool shape on residual stress of SAE 52100 hard turned steel by high speed machiningpt_BR
dc.typeArtigopt_BR


Ficheros en el ítem

FicherosTamañoFormatoVer

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem


© AUSJAL 2022

Asociación de Universidades Confiadas a la Compañía de Jesús en América Latina, AUSJAL
Av. Santa Teresa de Jesús Edif. Cerpe, Piso 2, Oficina AUSJAL Urb.
La Castellana, Chacao (1060) Caracas - Venezuela
Tel/Fax (+58-212)-266-13-41 /(+58-212)-266-85-62

Nuestras redes sociales

facebook Facebook

twitter Twitter

youtube Youtube

Asociaciones Jesuitas en el mundo
Ausjal en el mundo AJCU AUSJAL JESAM JCEP JCS JCAP