Avaliação do uso combinado de pó de aciaria elétrica (PAE) com resíduo do forno de cal (RFC) na hidratação de pastas de cimento

Abstract

The sustainable development conception has resulted in increased environmental pressures to improve the efficient use of resources and reduction of emissions and waste generation. In the steelmaking process through electric arc furnaces (EAF), dust generation occurs which is called electric arc furnace dust (EAFD). EAFD is composed by different metal oxides. Some common elements those constitute this dust is chromium, lead and cadmium, and therefore, waste is classified as class I – hazardous by NBR 10004. EAFD has been generated in large quantities every day across the country and it still has mainly landfilled. The pulp and paper industry, another important activity in the domestic industry, generates a lot of waste in different stages of the process, among which is the lime kiln waste (LKW), whose generation is associated with disruptions in the lime oven. Due to expressive amount of raw materials consumed in civil construction industry and also the variety of products available - cement, concrete, aggregates, ceramics, among others - this seems to be an alternative for waste recycling generated in other sectors. The incorporation of EAFD in the cement and concrete produces delayed setting time due to the presence of zinc (Zn) in the waste. Studies suggest that in amounts up to 1%, EAFD incorporation does not affect significantly cement properties. The aim of this work was to evaluate the influence of the combined use of EAFD and LKW in the process of hardening and evolution of the cement pastes hydration. Therefore, were evaluated the characterization of the waste performed through the grain size distribution, loss on ignition, specific gravity, specific surface area, elemental chemical analysis, pH, X ray powder diffraction with refinement by Rietveld and scanning electron microscopy.. The influence of the waste on the cement pastes was evaluated through the setting time tests in accordance with the NBR NM 65 (ABNT, 2003b) and evolution of semi-adiabatic temperature in fresh conditions, XRD with refinement by Rietveld, and SEM in cement pastes with different levels of waste substitution (REF, 1%, 2%, 3%, 5% e 10%) at different ages (1, 4 and 7 days). The setting time results and evolution of semi-adiabatic temperature indicated an increase in the setting time with the increase of the EAFD in cement pastes. In cement pastes with replacement of 1% EAFD combined or not with LKW, significant delays were not verified in the setting time, demonstrating the potential use of EAFD in the production of cement artifacts.