Mostrar registro simples

dc.contributor.authorSANTOS, D.C
dc.contributor.authorMACARRAO, I. M.
dc.contributor.authorRodrigo Magnabosco
dc.date.accessioned2021-10-28T20:36:14Z
dc.date.available2021-10-28T20:36:14Z
dc.date.issued2019-12-12
dc.identifier.citationSANTOS, D.C; MACARRAO, I. M.; MAGNABOSCO, R. Relation between pitting potential and PREN values for ferrite and austenite in duplex stainless steels. BHM Berg- und Hüttenmännische Monatshefte, v. 165, n. 1, p. 46-50, 2019.
dc.identifier.issn1613-7531
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/3419
dc.description.abstractThis work aims to investigate the relation between PREN of ferrite and austenite and the pitting potential of UNS S31803 DSS. Samples were solution-treated between 1040 °C and 1150 °C generating different phase fractions and, consequently, different alloy element contents. ThermoCalc® thermodynamic simulations were performed to predict the chemical composition of each phase allowing the PREN calculations. Besides, potentiodynamic polarization tests were conducted in 0.6 M NaCl solution at 70 °C to correlate pitting potential (Epit) and PREN. Thermodynamic simulation reveals that PREN for ferrite is higher than austenite between 975 °C and 1300 °C. Nevertheless, the electrochemical results show a slight reduction of pitting potential with increasing ferrite content, probably related to the reduction of Cr and Mo contents in this phase. Pits were found preferably in ferrite and in ferrite/austenite interfaces. This behavior suggests that, even with only a slight reduction of pitting potential and, consequently, a discrete corrosion resistance reduction, ferrite is more susceptible to pitting. No pits were found in austenite, suggesting that higher N contents are fundamental to maintain the corrosion resistance of this phase.
dc.relation.ispartofBHM Berg- und Hüttenmännische Monatshefte
dc.rightsAcesso Aberto
dc.subjectduplex
dc.subjectpitting
dc.subjectpolarization
dc.subjectPREN
dc.titleRelation Between Pitting Potential and PREN Values for Ferrite and Austenite in Duplex Stainless Steelspt_BR
dc.typeArtigopt_BR


Arquivos deste item

ArquivosTamanhoFormatoVisualização
Magnabosco_pdf1.133Mbapplication/pdfVisualizar/Abrir

Este item aparece na(s) seguinte(s) coleção(s)

Mostrar registro simples


© AUSJAL 2022

Asociación de Universidades Confiadas a la Compañía de Jesús en América Latina, AUSJAL
Av. Santa Teresa de Jesús Edif. Cerpe, Piso 2, Oficina AUSJAL Urb.
La Castellana, Chacao (1060) Caracas - Venezuela
Tel/Fax (+58-212)-266-13-41 /(+58-212)-266-85-62

Nuestras redes sociales

facebook Facebook

twitter Twitter

youtube Youtube

Asociaciones Jesuitas en el mundo
Ausjal en el mundo AJCU AUSJAL JESAM JCEP JCS JCAP