Mostrar el registro sencillo del ítem

dc.creatorSantana, Carlos Roberto Batista de
dc.date.accessioned2017-06-01T17:57:30Z
dc.date.accessioned2022-09-21T19:22:09Z
dc.date.available2011-07-07
dc.date.available2022-09-21T19:22:09Z
dc.date.issued2010-10-21
dc.identifier.citationSANTANA, Carlos Roberto Batista de. Estudo da resistência de aderência ao cisalhamento em revestimento argamassado. 2010. 109 f. Dissertação (Mestrado em Engenharia Civil) - Universidade Católica de Pernambuco, Recife, 2010.por
dc.identifier.urihttps://hdl.handle.net/20.500.12032/39867
dc.description.abstractThis research studies aims the determination of bond of rendering mortar, through shear efforts. The ABNT NBR 13528:2010 prescribes the test method of bond strength of mortar rendering, determined a constant load applied on a normal metallic device, connected directly to a specimen rendering mortar to be tested. This survey sought to verify, in the laboratory, the determination of resistance to shear adhesion as another parameter in the evaluation of rendering mortar. This study was carried out by testing pullout oblique to the rendering to be parsed. The same standard recommends that delimitation of the body surface-specimens these should be circular 50 mm in diameter. However, in this work were used specimens of squared form whose sides measure 100 mm having both surfaces in order to adapt the form and type of carrying out the tests to be carried out in the search. For the research achievement were made of ceramic bricks panels which were tested specimens under the angles from 0°, 45° and 90°. To make it possible to carry out the tests under the angles of 45° and 0° required adapter devices to run their tests. The goal of this work was to determine the resistance to shear adhesion from applying a load of pullout applied obliquely to finish. Through an analysis of variance, the results suggest a relationship between the workload pullout oblique (45°) and the resistance to shear adhesion (0°), goal of this researcheng
dc.formatapplication/pdfpor
dc.languageporpor
dc.publisherUniversidade Católica de Pernambucopor
dc.rightsAcesso Abertopor
dc.subjectcisalhamentopor
dc.subjectrevestimentos - testespor
dc.subjectdissertaçõespor
dc.subjectsheareng
dc.subjectcoatings - testingeng
dc.subjectdissertationeng
dc.titleEstudo da resistência de aderência ao cisalhamento em revestimento argamassadopor
dc.typeDissertaçãopor


Ficheros en el ítem

FicherosTamañoFormatoVer
dissertacao_carlos_roberto.pdf2.598Mbapplication/pdfVer/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem


© AUSJAL 2022

Asociación de Universidades Confiadas a la Compañía de Jesús en América Latina, AUSJAL
Av. Santa Teresa de Jesús Edif. Cerpe, Piso 2, Oficina AUSJAL Urb.
La Castellana, Chacao (1060) Caracas - Venezuela
Tel/Fax (+58-212)-266-13-41 /(+58-212)-266-85-62

Nuestras redes sociales

facebook Facebook

twitter Twitter

youtube Youtube

Asociaciones Jesuitas en el mundo
Ausjal en el mundo AJCU AUSJAL JESAM JCEP JCS JCAP