| dc.contributor.author | Farias A. | |
| dc.contributor.author | Delijaicov S. | |
| dc.contributor.author | De Mello J.D.B. | |
| dc.contributor.author | Filho M.S. | |
| dc.contributor.author | Batalha G.F. | |
| dc.date.accessioned | 2019-08-20T00:13:17Z | |
| dc.date.accessioned | 2023-05-03T20:36:08Z | |
| dc.date.available | 2019-08-20T00:13:17Z | |
| dc.date.available | 2023-05-03T20:36:08Z | |
| dc.date.issued | 2010 | |
| dc.identifier.citation | FARIAS, Adalto de; DELIJAICOV, Sérgio; de Mello, J. D. B.; Stipkovic Filho, M.; Batalha, G. F.. Surface Integrity and Residual Stresses Analysis by Strain Gages after Hard Turning Process of Case Hardened Steel AISI 8620. Advanced Materials Research (Online), v. 83-86, p. 718-724, 2009. | |
| dc.identifier.issn | 1022-6680 | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12032/89131 | |
| dc.description.abstract | This work aims an analysis on the functional surface integrity resulting from turning mechanical components manufactured from case hardened steel AISI 8620 with 1 millimeter average layer depth and hardness of 58-62HRC. A cBN tool with PVD coat and Wiper geometry-edge was used for continuous turning of hardened steel, the cutting conditions (Vc [m/min] and f in [mm/rev]) used were concerned to reflect large running production of mechanical components. © (2010) Trans Tech Publications. | |
| dc.relation.ispartof | Advanced Materials Research | |
| dc.rights | Acesso Restrito | |
| dc.title | Surface integrity and residual stresses analysis by strain gages after hard turning process of case hardened steel aisi 8620 | |
| dc.type | Artigo de evento | |
