Description
This paper presents a study concerning the toughness anisotropic behavior of two high-strength low-alloy steel sheets having ferrite-martensite (dual-phase) and ferrite-perlite grain-refined structures. The anisotropic behavior quantification was possible through tension and Charpy impact tests. It has been concluded that mechanical resistance has higher values in the longitudinal direction for both steels, and the inverse occurs for ductility. This could be explained with the microstructure preferential orientation with rolling direction. The higher tensile strength found in dual-phase steel is related to the presence of martensite islands, and the higher yield strength found in ferrite-perlite grain-refined steel is related to the fine structure observed. The higher toughness is a ferrite-perlite grain-refined steel characteristic, and this could be explained with the presence of only globular-oxide type inclusions, which reduces fracture nucleation sites, and does not promote fracture easy-propagation. Sulfide type inclusions found in dual-phase steel, associated with globular-oxide ones, give to this material a more brittle behavior. Toughness anisotropy is clearly noted, and in both cases the highest values are found inthe longitudinal direction, related to the preferential inclusion alignment achieved in rolling. The low ductile-to-brittle transition temperature found in both steels, however, could be related to the very fine structures found.
