Mostrar registro simples

dc.contributor.advisorKazmierczak, Claudio de Souza
dc.contributor.authorOliveira, Valéria Costa de
dc.date.accessioned2022-12-09T14:26:52Z
dc.date.accessioned2023-03-22T20:07:04Z
dc.date.available2022-12-09T14:26:52Z
dc.date.available2023-03-22T20:07:04Z
dc.date.issued2022-08-31
dc.identifier.urihttps://hdl.handle.net/20.500.12032/80019
dc.description.abstractThe sealing system adopted in Brazil, traditionally, consists of ceramic blocks and mortar renderings. The property that relates the junction between the substrate and the mortar is adhesion. Ceramic blocks are characterized according to their porosity, surface roughness and capillary suction, depending on the composition of the raw material, the process and the sintering temperature used in their production. Mortars are multiphase materials, composed of particles with different granulometric distributions, homogenized in the fresh state and which in the hardened state will result in volumetric changes, including the cement hydration products. In this sense, the main objective is the quantitative analysis of the influence of roughness and interface area between ceramic substrates and cementitious coating on the tensile bond strength. Thus, it was proposed to work with a single cement paste, apply it on five ceramic blocks with different roughness and thus quantify the adhesion of the paste in different topographies of substrates and correlate the interface area between the substrates and the Portland cement paste. . The ceramic blocks were characterized for roughness using 3D methods by laser profilometry and photogrammetry. In this research, roughness parameters that showed a significant interference in the adhesion between the ceramic block and the cement matrix were quantified. The heterogeneity of the ceramic substrate implies that when the tensile strength between a cementitious matrix and the substrate is determined in a smaller area, less variability and greater strength is obtained than when it is determined in a larger area. Roughness has a great influence on the tensile bond strength, which is also influenced by other factors that overlap. A multiple linear regression, determined from different ceramic substrates, when used for the individual analysis of each substrate, cannot estimate adhesion results with a significant coefficient of determination. However, it is possible to relate a roughness matrix, correlating the average height of the valleys (Rvm) and the average roughness (Ra), with the respective average areas of the valleys (Amv) of the substrate and with the average tensile bond strengths.en
dc.description.sponsorshipNenhumapt_BR
dc.languagept_BRpt_BR
dc.publisherUniversidade do Vale do Rio dos Sinospt_BR
dc.rightsopenAccesspt_BR
dc.subjectAderênciapt_BR
dc.subjectAdherenceen
dc.titleAnálise quantitativa da influência da rugosidade e da área de interface entre substratos cerâmicos e revestimento cimentício na resistência de aderência à traçãopt_BR
dc.typeTesept_BR


Arquivos deste item

ArquivosTamanhoFormatoVisualização
Valeria Costa de Oliveira_PROTEGIDO.pdf7.365Mbapplication/pdfVisualizar/Abrir

Este item aparece na(s) seguinte(s) coleção(s)

Mostrar registro simples


© AUSJAL 2022

Asociación de Universidades Confiadas a la Compañía de Jesús en América Latina, AUSJAL
Av. Santa Teresa de Jesús Edif. Cerpe, Piso 2, Oficina AUSJAL Urb.
La Castellana, Chacao (1060) Caracas - Venezuela
Tel/Fax (+58-212)-266-13-41 /(+58-212)-266-85-62

Nuestras redes sociales

facebook Facebook

twitter Twitter

youtube Youtube

Asociaciones Jesuitas en el mundo
Ausjal en el mundo AJCU AUSJAL JESAM JCEP JCS JCAP