Mostrar registro simples

dc.contributor.advisorChávez-Hurtado, Jose L.
dc.contributor.advisorMartínez-Guerrero, Esteban
dc.contributor.advisorAguilera-Galicia, Cuauhtémoc R.
dc.contributor.authorGonzález-Ornelas, Luis A.
dc.date.accessioned2021-10-30T00:32:27Z
dc.date.accessioned2023-03-10T16:53:57Z
dc.date.available2021-10-30T00:32:27Z
dc.date.available2023-03-10T16:53:57Z
dc.date.issued2021-10
dc.identifier.citationGonzález-Ornelas, L. A. (2021). Voltaje de referencia BandGap y módulo de comunicación serial para SAR ADC 10 bits de baja potencia para aplicaciones biomédicas. Trabajo de obtención de grado, Especialidad en Diseño de Sistemas en Chip. Tlaquepaque, Jalisco: ITESO.es_MX
dc.identifier.urihttps://hdl.handle.net/20.500.12032/69109
dc.descriptionThe document presents two designs a BandGap Reference Voltage, and a Communication Serial Module for a 10 bits SAR ADC for low-power applications. Designs were implemented using TSMC 0.18 µm CMOS technology with 1.8 V supply voltage. The BandGap Reference Voltage was designed to provide a reference voltage of 900 mV ±500 µV. The bandgap was tested at simulation level under different temperature conditions to ensure constant output in a temperature range from –40 °C to 85 °C. The Communication Serial Module is designed using the hardware description language Verilog. This module receives the 10 bits parallel output of the SAR ADC and retransmits the conversion result into a serial format using the SPI format. The Communication Serial Module was tested under a simulator, where multiple test cases were applied to stimulate in different ways the module. Both circuits were designed to accomplish the SAR ADC requirements in which BandGap supplies the reference voltage to the capacitor array in the SAR ADC and the Serial Module sends the data values after the conversion is finalized.es_MX
dc.description.sponsorshipITESO, A. C.es
dc.language.isoenges_MX
dc.publisherITESOes_MX
dc.rights.urihttp://quijote.biblio.iteso.mx/licencias/CC-BY-NC-2.5-MX.pdfes_MX
dc.subjectDigital to Analog Converteres_MX
dc.titleVoltaje de referencia BandGap y módulo de comunicación serial para SAR ADC 10 bits de baja potencia para aplicaciones biomédicases_MX
dc.typeinfo:eu-repo/semantics/academicSpecializationes_MX


Arquivos deste item

ArquivosTamanhoFormatoVisualização
EDSEC_ToG_Luis_Angel_Gonzalez_Ornelas.pdf2.498Mbapplication/pdfVisualizar/Abrir

Este item aparece na(s) seguinte(s) coleção(s)

Mostrar registro simples


© AUSJAL 2022

Asociación de Universidades Confiadas a la Compañía de Jesús en América Latina, AUSJAL
Av. Santa Teresa de Jesús Edif. Cerpe, Piso 2, Oficina AUSJAL Urb.
La Castellana, Chacao (1060) Caracas - Venezuela
Tel/Fax (+58-212)-266-13-41 /(+58-212)-266-85-62

Nuestras redes sociales

facebook Facebook

twitter Twitter

youtube Youtube

Asociaciones Jesuitas en el mundo
Ausjal en el mundo AJCU AUSJAL JESAM JCEP JCS JCAP