Show simple item record

[en] NON-LINEAR BEHAVIOR AND INSTABILITY OF HYPERELASTIC MEMBRANES AND SHELLS

dc.contributorPAULO BATISTA GONCALVES
dc.creatorSTEFANE RODRIGUES XAVIER LOPES
dc.date2004-01-21
dc.date.accessioned2022-09-21T21:42:15Z
dc.date.available2022-09-21T21:42:15Z
dc.identifierhttps://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=4414@1
dc.identifierhttps://www.maxwell.vrac.puc-rio.br/colecao.php?strSecao=resultado&nrSeq=4414@2
dc.identifierhttp://doi.org/10.17771/PUCRio.acad.4414
dc.identifier.urihttps://hdl.handle.net/20.500.12032/42499
dc.description[pt] Esta tese tem como objetivo analisar o comportamento estático não-linear e possíveis instabilidades de membranas e cascas hiperelásticas. Uma análise experimental detalhada de membranas e cascas com diferentes geometrias e submetidas à tração axial e pressão interna uniforme é realizada. Um aparato foi desenvolvido para possibilitar a tração da estrutura enquanto a mesma era preenchida por ar. As cascas e membranas utilizadas na análise experimental são compostas por elastômero isotrópico, homogêneo e hiperelástico, o qual é modelado como um material Neo- Hookeano incompressível, descrito por uma única constante elástica, ou por material do tipo Mooney-Rivlin ou Ogden, descritos por duas constantes elásticas. Estas constantes são obtidas pela comparação de resultados experimentais e numéricos para a estrutura sob tração axial uniforme. A estrutura foi discretizada utilizando-se elementos finitos de casca ou membrana mais apropriados e as equações de equilíbrio não-lineares resultantes resolvidas usando-se o programa de elementos finitos ABAQUS. Quando a estrutura tracionada é preenchida com ar observa-se que a pressão inicialmente cresce juntamente com o volume interno até um certo valor crítico. Após atingir este valor crítico um bulbo de deformação é formado subitamente num local ao longo do comprimento da estrutura e a pressão interna decresce subitamente, entretanto o volume interno da estrutura continua a crescer. Os resultados experimentais aproximam-se de maneira satisfatória aos resultados numéricos. Uma análise paramétrica detalhada é desenvolvida para estudar a influencia da tração inicial bem como dos parâmetros geométricos no comportamento não-linear e na capacidade de carga da estrutura. A influencia de diferentes tipos de imperfeições locais também é detalhadamente analisada.
dc.description[en] This thesis investigates the large deformations of hyperelastic membranes and shells. The static nonlinear behavior and possible instabilities of the membrane are both analyzed. A detailed experimental analysis was carried out involving cylindrical membranes and shells with different geometries and initial axial forces and the influence of the axial force and the internal pressure were investigated. An apparatus was developed to support vertically the extended structure while it is filled with air. The membranes and shells used in the experiments are composed of an isotropic, homogeneous and hyperelastic rubber, which is modeled as a Neo-Hookean incompressible material, described by a single elastic constant, or a Mooney-Rivlin or Ogden material, described by two elastic constants. Theses constants were obtained by comparing the experimental and numerical solutions for the structure under traction. The structure was discretized using appropriate membrane or shell finite elements and the resulting nonlinear equilibrium equations solved using the FE software ABAQUS. When the extended structure was filled with air, it was observed that the pressure increased initially as the volume increased until a certain critical value was reached, after which a bubble was suddenly formed along the structure and the internal pressure decreased markedly with increasing volume. The experimental results are, as shown in the thesis, in satisfactory agreement with the theory. A detailed parametric analysis was also carried out to study the influence of the initial traction and geometric parameters on the non-linear behavior and load carrying capacity of the structure. The influence of different types of local imperfections was also studied in detail.
dc.languagept
dc.publisherMAXWELL
dc.subject[pt] GRANDES DEFORMACOES
dc.subject[pt] CASCAS HIPERELASTICAS
dc.subject[pt] MEMBRANAS
dc.subject[pt] METODOS NUMERICOS
dc.subject[pt] INSTABILIDADE
dc.subject[pt] ANALISE EXPERIMENTAL
dc.subject[en] LARGE STRAIN
dc.subject[en] HYPERELASTIC SHELL
dc.subject[en] MEMBRANE
dc.subject[en] NUMERICAL METHODS
dc.subject[en] INSTABILITY
dc.subject[en] EXPERIMENTAL ANALYSIS
dc.title[pt] COMPORTAMENTO NÃO-LINEAR E INSTABILIDADE DE MEMBRANAS E CASCAS HIPERELÁSTICAS
dc.title[en] NON-LINEAR BEHAVIOR AND INSTABILITY OF HYPERELASTIC MEMBRANES AND SHELLS
dc.typeTEXTO


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record


© AUSJAL 2022

Asociación de Universidades Confiadas a la Compañía de Jesús en América Latina, AUSJAL
Av. Santa Teresa de Jesús Edif. Cerpe, Piso 2, Oficina AUSJAL Urb.
La Castellana, Chacao (1060) Caracas - Venezuela
Tel/Fax (+58-212)-266-13-41 /(+58-212)-266-85-62

Nuestras redes sociales

facebook Facebook

twitter Twitter

youtube Youtube

Asociaciones Jesuitas en el mundo
Ausjal en el mundo AJCU AUSJAL JESAM JCEP JCS JCAP